
Rustins Yacht Varnish – Gloss or Satin Finish
Product Specifications
| Product Code | PRP-Rust | Yacht | Gloss | 1 Litre |
|---|---|
| Size | Gloss / 1 Litre |
Ask Bio about this product
AI assistant · instant answers
Rustins Yacht Varnish is a durable, Tung Oil-based exterior wood varnish specially formulated to protect marine and other outdoor woodwork against the effects of weather. It provides excellent adhesion and a flexible, weather-resistant finish that helps protect timber against cracking, peeling and f
Get a reminder for regular delivery and save with code SUBSCRIBE10 at checkout. Pause or cancel anytime.
Sold and dispatched by Priory Polishes View store →
Description
Rustins Yacht Varnish is a durable, Tung Oil-based exterior wood varnish formulated to protect outdoor and marine woodwork against the effects of weather. It provides excellent adhesion and a flexible, weather-resistant finish that helps protect timber against cracking, peeling and flaking when correctly applied.
Suitable for a variety of exterior wooden surfaces, including doors, window frames, cladding and marine woodwork, Rustins Yacht Varnish provides a protective finish that helps preserve and enhance the natural appearance of timber.
Features and Benefits
- Tung Oil-based exterior wood varnish
- Suitable for marine and outdoor woodwork
- Helps protect timber against rain, sunlight, frost and salt
- Flexible finish with excellent adhesion
- Helps prevent cracking, peeling and flaking
- Available in Gloss and Satin finishes
Where Can Rustins Yacht Varnish Be Used?
Rustins Yacht Varnish is suitable for exterior timber that requires a durable, weather-resistant finish. Typical uses include:
- Exterior wooden doors and window frames
- Garden timber and outdoor woodwork
- Wooden cladding and exterior joinery
- Marine woodwork and suitable boat timber
- Other exterior wooden surfaces requiring a protective varnish
Always check that the existing finish and timber are suitable before application. It is not intended as a substitute for specialist coatings where these are required.
How to Apply Rustins Yacht Varnish
For the best results, ensure the timber is clean, dry and properly prepared before applying Rustins Yacht Varnish.
- Prepare the surface: Remove dirt, grease, loose material and any failing varnish. Sand the surface smooth and remove all dust. Previously varnished surfaces should be cleaned with white spirit and steel wool to ensure the surface is clean and free from wax and grease before applying.
- If the existing finish is flaking or cracking, it should be stripped using Rustins Strypit Paint and Varnish Stripper.
- Weather-stained wood can be bleached with a Wood Bleach.
- Shake or stir the tin well before use
- First coat on bare wood: Thin the first coat with 25% white spirit by volume to help the varnish penetrate the timber.
- Apply further coats: Apply at least three coats in total, allowing each coat to become hard dry before applying the next.
- End grain: Pay particular attention to exposed end grain, as it is more absorbent and may require additional coats.
Use a good-quality brush and apply evenly, following the instructions on the product packaging. Do not apply in damp conditions or when rain is expected before the coating has dried.
Coverage and Cleaning
Coverage: Approximately 13 square metres per litre per coat, depending on the condition and absorbency of the timber.
Brush cleaning: Clean brushes using white spirit or a suitable brush cleaner, following the manufacturer’s instructions.
Frequently Asked Questions
Should Rustins Yacht Varnish be thinned?
When applying Rustins Yacht Varnish to new, bare wood, the first coat can be thinned with 25% white spirit by volume. This helps the varnish penetrate the timber. When applying to previously varnished wood that is in sound condition, there is no need to thin the varnish, provided the surface has been correctly prepared.
How should the varnish be applied to the end grain?
End grain is particularly absorbent and can allow moisture to penetrate the timber more easily. Apply the varnish carefully with a good-quality brush, ensuring that all exposed end grain is thoroughly covered. Porous end grain may require additional coats to achieve adequate protection.
What is the recommended number of coats to apply?
Apply at least three coats of Rustins Yacht Varnish for good durability. Allow each coat to become hard dry before applying the next. Drying and recoating times depend on temperature and humidity, so always follow the product instructions. Porous end grain or badly weathered timber may require additional coats.
Can Rustins Yacht Varnish be used on bare wood?
Yes. On new, bare timber, thin the first coat with 25% white spirit by volume to help it penetrate the wood. Apply further coats as directed on the packaging.
What is the difference between Gloss and Satin Yacht Varnish?
Gloss provides a shiny, reflective finish, while Satin gives a softer, less reflective appearance. Both are designed to provide a protective finish for suitable exterior woodwork.
Can Rustins Yacht Varnish be used outdoors?
Yes. Rustins Yacht Varnish is formulated for exterior woodwork and helps protect timber against weathering. Apply it to properly prepared, dry timber and allow it to dry under suitable conditions.
What temperature should Rustins Yacht Varnish be applied at?
Do not apply below 10°C. Avoid applying in damp conditions or when rain is expected before the varnish has had time to dry. Always follow the application guidance on the tin.
Buy Rustins Yacht Varnish from Priory Polishes
Buy Rustins Yacht Varnish from Priory Polishes, available in Gloss and Satin finishes. Choose the finish and tin size you require for your exterior wood protection project.
For other wood finishing and restoration products, browse our range of wood varnishes and Rustins products.
Please note – Do not use below 10 degrees Celsius, in damp conditions or if rain is imminent. Some authorities have special facilities for disposal of waste paints and varnishes. Do not empty into drains, water courses or the sea.
Always test in a small inconspicuous area first to ensure you are happy with the results.
Always wear protective gloves when using this product.
Health and Safety
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour/spray. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE/doctor if you feel unwell. Store in a well-ventilated area. Keep container tightly closed. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Keep cool. Contains HYDROCARBONS, C9 – C11. n-alkanes, isoalkanes, cyclics,<2%aromatics.UFI: 1K9K-YN5Y-E717-N5WG
Safety Data Sheets
PDFSafety Data SheetPDFProduct InformationQuestions & answers
Ask Bio — questions answered by our team are published here.
No published questions yet. Ask Bio — once our team answers, it appears here.
Similar Options
Other choices in this category
Complete Your Basket
Goes well with this product
Customers also bought
Based on real order data