Osmo Opaque Gloss Wood Stain (2104) White – 750ml

Osmo Opaque Gloss Wood Stain (2104) White

Product Specifications

Product CodePRP-OS 2104 Opaque Gloss | 750ml
Size750ml
In stock
£42.09

Size: 750ml

Ask Bio about this product

AI assistant · instant answers

Osmo Opaque Gloss Wood Stain (2104 Satin-Gloss White) is the ideal window and door finish that does not crack, peel, flake or blister. Osmo Opaque Gloss Wood Stain is suitable for interior or exterior wood. Ideal for coating or re-coating wood windows, shutters and doors, as well roof soffits, fence

1
Subscribe & save 10%

Get a reminder for regular delivery and save with code SUBSCRIBE10 at checkout. Pause or cancel anytime.

Supplied and dispatched by Priory Polishes View store →

Allergen information: Full label details for this product are still being verified. If you have a food allergy or intolerance, please check the pack label on delivery or contact us before ordering, and we will confirm with the supplier.

Description

Osmo Opaque Gloss Wood Stain (2104 Satin-Gloss White) is the ideal window and door finish that does not crack, peel, flake or blister. Osmo Opaque Gloss Wood Stain is suitable for interior or exterior wood. Ideal for coating or re-coating wood windows, shutters and doors, as well roof soffits, fences, screens, pergolas, posts, garden pavilions, greenhouses and garden furniture. This opaque microporous wood finish has unsurpassed durability. It is extremely high content of solids of 85%. This high content of permanent components results in high durability and product coverage. Osmo Opaque Gloss Wood Stain is block-resistant, no primer is needed and it is easy to apply. The finish stays workable while coating.

How to use Osmo Opaque Gloss Wood Stain

  1. The wood surface must be clean, dry and frost-free (moisture content max. 20%).
  2. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
  3. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar
    surfaces.
  4. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.
  5. Osmo Opaque Gloss Wood Stain is ready to use. Do not thin. Stir well.
  6. Apply using an Osmo Flat Brush or Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.
  7. Allow to dry for approx. 10-12 hours under good ventilation.
  8. After drying, apply a second coat – also thinly.
  9. For renovation works, one coat applied to the clean and dry surface is usually sufficient.

Please Note

When used in dark indoor areas, the coating has due to its high oil content a slight yellowing effect.

CLEANING OF TOOLS – With Osmo Brush Cleaner (free of aromatic compounds).

DRYING TIME – Approx. 10-12 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying. Dust-dry after approx. 6 hours. Ventilate indoor areas well. Allow windows to dry thoroughly before closing.

COVERAGE – 1 litre covers approx. 20 m² with one coat. Coverage depends significantly on the condition of the wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may lead to differences in coverage.

STORAGE – Up to 5 years and longer if can is kept dry and closed tightly. If thickened by frost, store for 24-36 hours at room temperature before use.

Health and Safety

Keep out of reach of children. Do not get in eyes, on skin, or on clothing. If medical advice is needed, have product container or label at hand. Use only outdoors or in a well-ventilated area. Warning: Wash out any used cloth impregnated with this product immediately after use or store in an airtight container (danger of self-ignition). The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations.

INGREDIENTS
Based on natural plant oils (sunflower oil, soya oil), titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Volatile component: dearomatized white spirit (benzene-free). EU limit value for this product (cat. A/d): 300 g/l VOC (2010). This product contains max. 300 g/l VOC.

Customer Examples:

Osmo Opaque Gloss Wood Stain
Windowsill finished with Osmo Opaque Gloss Wood Stain
Osmo Opaque Gloss Wood Stain
Osmo Opaque Gloss Wood Stain being applied
Osmo Opaque Gloss Wood Stain
Osmo white Wood Stain on a window frame
Osmo Opaque Gloss Wood Stain
Outdoor Window frame with Osmo Opaque Gloss Wood Stain being applied

Safety Data Sheets

PDFProduct InformationPDFSafety Data

Questions & answers

Ask Bio — questions answered by our team are published here.

No published questions yet. Ask Bio — once our team answers, it appears here.

Similar Options

Other choices in this category

Complete Your Basket

Goes well with this product

Customers also bought

Based on real order data