Bumper Crop Blueberry Special Fertiliser & Plant Food (12-10-10+4%Mg) – re-sealable-tub / 20kg

Bumper Crop Blueberry Special Fertiliser & Plant Food (12-10-10+4%Mg)

Product Specifications

Product CodeEGS-BUMP_BLUE_SPEC_TUB_20KG
Sizere-sealable-tub / 20kg
In stock
£74.59

Supplied In: re-sealable-tub

Ask Bio about this product

AI assistant · instant answers

>A COMPLETE FEED – Made to provide a complete soluble NPK feed for container or soil grown Blueberries, especially where the irrigation water contains more than 150ppm bicarbonates. MAXIMISE YOUR YIELD – Elixir’s Blueberry Special contains a balanced range of micro and macro nutrients to maximise th

1
Subscribe & save 10%

Get a reminder for regular delivery and save with code SUBSCRIBE10 at checkout. Pause or cancel anytime.

Supplied and dispatched by Elixir Garden Supplies View store →

Allergen information: Full label details for this product are still being verified. If you have a food allergy or intolerance, please check the pack label on delivery or contact us before ordering, and we will confirm with the supplier.

Description

This versatile 12-10-10 fertiliser is the exact same formula, whether marketed for [Blueberry Special], [Early Season], or [Ericaceous]. It gives balanced nutrition and supports healthy growth for a range of plants.

Bumper Crop Blueberry Special helps grow the perfect blueberries. Select types of Nitrogen and a balanced range of macro and micro nutrients maximise the yield of your crop. Added trace elements and micro nutrients are chelated to ensure they are fully available to the plant.

Due to consumer demand blueberries are becoming more and more popular and therefore an attractive crop. The cultural and nutritional requirements are a little unusual, so care is needed to optimise yields and quality. This Blueberry Special fertilizer was developed accordingly and is the ideal choice for today’s progressive Blueberry grower.

Applications

Liquid Feed:

The standard rate is 1g / litre of water. However this can vary anywhere between 0.5g / litre – 2g / litre. Use the lower rates for sensitive plants, such as pot plants under glass. The higher rates should be used on rapidly growing plants in outdoor soils. Do not use more than 2g / litre.

Used in the same way as other water-soluble fertilisers. Ericaceous feed is usually applied via a normal watering can. Simply add the appropriate amount of feed to the can, add water and apply liberally to the plant root area. A very approximate guide is 5litres / square metre.

The feed is best applied as a liquid feed whilst the plant is actively growing. Ideally alongside watering.

Foliar Feed:

Plants are designed to take up nutrients through their roots, but most nutrients can be absorbed through the leaves. Foliar feeding can give crops a valuable boost. Particularly if the root system is not functioning well due to drought, disease or pest attack and other stress factors. Ericaceous feed can be applied to plant foliage via a hand or knapsack sprayer or similar equipment. Prepare a 0.05 – 0.1% (0.5 – 1.0 g / litre) solution and apply to coat the leaves and stems with a thin film of moisture, with little or no “run-off”. Do not exceed a 1g / litre concentration.

Whilst using a sprayer the following points should be observed:

  • Use a sprayer nozzle that produces a fine mist.
  • Only apply sufficient spray solution to to coat the leaves and stems with a film of moisture with little or no “run-off”.
  • Carry out spraying on a calm day, but not during strong sunshine or high temperatures. The best time is late afternoon or evening.
  • Postpone spraying if rain is imminent. If rain falls within 4 hours of spraying, re-spray the crops 3 or 4 days later.
  • For application via hose-end diluters, please refer to the device manufacturer’s directions for use.
  • If you are in an area with acute hard water, Soluble NPK fertilisers can dry on the leaves and leave unsightly residues.

Mineral Analysis:

Names Percentages
 N 12%
P2O5 10%
K2O (K) 10.8%
MgO (Mg) 4.7%
SO3 (S) 46
B soluble in water 0.020%
Cu chelated by EDTA 0.006%
Fe chelated by EDTA 0.060%
Mn chelated by EDTA 0.030%
BMo soluble in water 0.002%
Zn chelated by EDTA 0.016%

Questions & answers

Ask Bio — questions answered by our team are published here.

No published questions yet. Ask Bio — once our team answers, it appears here.

Complete Your Basket

Goes well with this product