
Mylands Wood Finishing Oil – 1 Litre
Ask Bio about this product
AI assistant · instant answers
Mylands Wood Finishing Oil is a durable, hard-wearing wood oil for protecting and enhancing interior timber and exterior teak. Combining the protective properties of Tung Oil with quality oil resins, it creates a robust finish with good resistance to water, heat and alcohol. Particularly suitable fo
Get a reminder for regular delivery and save with code SUBSCRIBE10 at checkout. Pause or cancel anytime.
Supplied and dispatched by Priory Polishes View store →
Description
Mylands Wood Finishing Oil is a high-quality wood oil designed to protect and enhance interior timber and exterior teak. Combining the hard-wearing properties of Tung Oil with quality oil resins, it produces a durable finish with good resistance to water, heat and alcohol.
It is particularly suited to kitchen and bathroom worktops, tables and furniture that are in constant use. The oil penetrates into the timber to provide protection while enhancing the natural appearance of the wood.
Mylands Wood Finishing Oil can be applied to new or previously finished timber and is also suitable for use over a range of compatible wood stains. Supplied in a 1 litre container.
Benefits of Mylands Wood Finishing Oil
- Produces a tough, hard-wearing finish
- Good resistance to water, heat and alcohol
- Combines Tung Oil with quality oil resins
- Suitable for interior woodwork and exterior teak
- Ideal for kitchen and bathroom worktops, tables and furniture
- Can be applied over suitable wood stains
- Can be over-waxed on decorative furniture after the recommended curing period
- Approximate coverage of 10–12m² per litre
What Is Mylands Wood Finishing Oil Used For?
Kitchen and Bathroom Worktops
Mylands Wood Finishing Oil is particularly suitable for wooden kitchen and bathroom worktops. Its hard-wearing finish offers good resistance to water, heat and alcohol, making it a practical choice for surfaces that receive regular use. The manufacturer recommends applying at least three to four coats to worktops for adequate protection.
Tables and Furniture
The oil is ideal for protecting wooden tables and furniture, helping to create a durable finish while enhancing the natural character of the timber. It can also be over-waxed on decorative furniture once the oil has been allowed to cure for seven days.
Interior Woodwork
Suitable for a wide range of interior wooden surfaces, Mylands Wood Finishing Oil can be used on new or previously finished timber, provided the surface has been correctly prepared.
Exterior Teak
Mylands Wood Finishing Oil can also be used on exterior teak. It is important to follow the application instructions and maintain the finish as required.
Preparing Wood Before Applying Finishing Oil
Good preparation is important to achieve an even, durable finish.
- New timber: Ensure the surface is clean, dry and properly prepared before applying the oil.
- Previously finished timber: Remove old finishes using a suitable paint and varnish remover.
- Previously oiled or waxed surfaces: Clean with a De-waxing Solution or lightly abrade using fine abrasive paper or steel wool.
- Previously stained timber: Mylands Light Fast Stains, Non Fade Stains, Water Based Stains and Earth Stains are listed as suitable beneath Wood Finishing Oil. Make sure the stain is completely dry before applying the oil.
Always test the oil on an offcut of timber or an inconspicuous area first to check that you are happy with the colour and finish.
How to Apply Mylands Wood Finishing Oil
- Apply the first coat: Using a clean, lint-free cotton cloth, apply a thin, even coat of Mylands Wood Finishing Oil.
- Allow to dry: Leave the first coat to dry overnight.
- Lightly cut back: Once dry, lightly abrade the surface using 320-grit finishing paper or 0000-grade wire wool. For best results, the manufacturer recommends using the finishing paper first, followed by the wire wool.
- Apply further coats: Apply additional thin coats in the same way, allowing the recommended drying time between applications.
- Build the finish: Continue until the desired finish has been achieved. At least three to four coats are recommended for worktops to provide adequate protection.
Drying Times
At approximately 20°C, the manufacturer’s stated drying times are:
- Touch dry: Approximately 4 hours.
- Ready for sanding: Approximately 4 hours.
- Recoat: After approximately 12 hours.
Drying times can vary depending on temperature, ventilation and the absorbency of the timber.
Applying Wax Over Wood Finishing Oil
If you want to apply wax over the oiled finish on decorative furniture, allow a curing period of seven days before applying the wax. This helps ensure the oil has had sufficient time to cure.
Cleaning and Maintenance
Clean oiled wooden surfaces using a damp cloth. For more heavily soiled surfaces, a small amount of liquid detergent can be added to the water.
Old or worn oiled surfaces can be refurbished by lightly abrading the timber and applying further coats of Mylands Wood Finishing Oil. This helps refresh the finish and restore protection.
Coverage, Cleaning and Storage
- Coverage: Approximately 10–12m² per litre, depending on the absorbency of the timber and application method.
- Cleaning tools: Use white spirit. Clean brushes immediately after use before the oil dries.
- Storage: Replace the lid securely after use to prevent the oil deteriorating.
- Storage temperature: Store above 5°C.
Important Safety Information
Always read the product instructions and safety data sheet before use. Mylands Wood Finishing Oil contains Tung Oil, which is extracted from nuts and may cause an allergic reaction.
Important: Cloths and rags soaked with Wood Finishing Oil must not be left rolled up or screwed together, as they can spontaneously combust. Spread used cloths out flat to dry safely or place them in a container filled with water. Follow the manufacturer’s safety instructions for disposal.
Frequently Asked Questions
What is Mylands Wood Finishing Oil used for?
It is a durable wood finishing oil for protecting interior timber and exterior teak. It is particularly suitable for kitchen and bathroom worktops, tables and furniture.
Can Mylands Wood Finishing Oil be used on kitchen worktops?
Yes. It is particularly suited to wooden kitchen worktops. The manufacturer recommends applying at least three to four coats to worktops to provide adequate protection.
Can I use Mylands Wood Finishing Oil on bathroom worktops?
Yes. It is suitable for bathroom worktops and offers good resistance to water. Always wipe up standing water and maintain the finish as necessary.
Can I use this oil on exterior wood?
Mylands Wood Finishing Oil is suitable for exterior teak as well as interior woodwork. It should not automatically be assumed suitable for every type of exterior timber.
How many coats of Mylands Wood Finishing Oil should I apply?
Further coats can be applied to build the required finish. For worktops, the manufacturer recommends at least three to four coats to provide adequate protection.
How long does Mylands Wood Finishing Oil take to dry?
At approximately 20°C, it is touch dry and ready for sanding in around four hours, with recoating possible after approximately 12 hours. The first coat should be left overnight before cutting back and applying further coats.
Can I apply Mylands Wood Finishing Oil over wood stain?
Yes. The manufacturer lists Light Fast Stains, Non Fade Stains, Water Based Stains and Earth Stains as suitable beneath the oil. Make sure the stain is completely dry before applying the finishing oil.
Can I apply wax over Mylands Wood Finishing Oil?
Yes, on decorative furniture the oiled finish may be over-waxed. Allow a curing time of seven days before applying the wax.
How much area does one litre cover?
Coverage is approximately 10–12m² per litre, depending on the absorbency of the timber and the method of application.
How do I clean brushes after using Mylands Wood Finishing Oil?
Clean brushes immediately after use with white spirit, before the oil has dried.
Can I use Mylands Wood Finishing Oil on previously oiled or waxed wood?
Yes, provided the surface is prepared correctly. Clean old oiled or waxed surfaces with Mylands Special De-waxing Solution or lightly abrade with fine abrasive paper or steel wool before applying the oil.
Buy Mylands Wood Finishing Oil from Priory Polishes
Priory Polishes supplies Mylands Wood Finishing Oil for furniture restoration, wooden worktops and interior wood finishing. Its durable Tung Oil-based formula offers good resistance to water, heat and alcohol, making it a popular choice for wooden surfaces that receive regular use.
Explore our range of Mylands products, browse our worktop oils or view our wood oils.
Safety Data Sheets
PDFSafety DataQuestions & answers
Ask Bio — questions answered by our team are published here.
No published questions yet. Ask Bio — once our team answers, it appears here.
Similar Options
Other choices in this category
Complete Your Basket
Goes well with this product
Customers also bought
Based on real order data