Mylands Danish Oil – 1 Litre

Mylands Danish Oil – 1 Litre

In stock
£27.39

Ask Bio about this product

AI assistant · instant answers

Mylands Danish Oil is a versatile wood oil made from a blend of Tung Oil, synthetic resins, driers and solvents. It penetrates deeply into timber, enhancing the natural grain while providing protection against liquids. Suitable for most types of wood, both indoors and outdoors, it dries to a hard, w

1
Subscribe & save 10%

Get a reminder for regular delivery and save with code SUBSCRIBE10 at checkout. Pause or cancel anytime.

Sold and dispatched by Priory Polishes View store →

Allergen information: Full label details for this product are still being verified. If you have a food allergy or intolerance, please check the pack label on delivery or contact us before ordering, and we will confirm with the supplier.

Description

Mylands Danish Oil is a versatile wood finishing oil made from a blend of Tung Oil, synthetic resins, driers and solvents. Designed to penetrate deeply into timber, it enhances the natural beauty and grain of the wood while providing protection against liquids.

Once dry, Mylands Danish Oil produces a hard, water-resistant satin finish that is not tacky like some other wood oils. Suitable for most types of timber, it can be used on both interior and exterior wood, including furniture and garden furniture.

Features & Benefits

  • Deeply penetrates timber to provide protection.
  • Enhances the natural colour and grain of the wood.
  • Dries to a hard, water-resistant satin finish.
  • Suitable for most types of timber.
  • Can be used on interior and exterior wood surfaces.
  • Suitable for garden furniture and other outdoor timber.
  • Can be applied using a brush or cloth.

What Can Mylands Danish Oil Be Used On?

Mylands Danish Oil is suitable for a wide range of interior and exterior timber surfaces. Its penetrating formula enhances the natural grain while providing a protective finish.

  • Interior furniture: Ideal for enhancing and protecting wooden furniture.
  • Worktops: Suitable for timber worktops, providing a water-resistant finish.
  • Garden furniture: Suitable for protecting exterior wooden furniture.
  • Exterior wood: Can be used on outdoor timber, including oak and softwoods.
  • General wood finishing: Suitable for most timber types.

How to Apply Mylands Danish Oil

Always test the oil on an off-cut of timber or an inconspicuous area first to check the colour and finish before treating the whole surface.

Preparing the Wood

For previously treated timber, ensure the surface is clean before application. The manufacturer’s instructions recommend using steel wire wool followed by washing down with white spirit.

Mylands Light Fast Stains and Water Based Stains can be used beneath Danish Oil. These stains should only be applied to bare timber and must be completely dry before the oil is applied.

Application for Interior Wood

  1. Apply a liberal coat of Danish Oil using a clean cloth or brush.
  2. Allow the oil to penetrate the timber for a few minutes.
  3. Wipe away any surplus oil using a clean cloth.
  4. Allow to dry before repeating the process.
  5. Continue until the desired build and appearance is achieved. A minimum of three coats is normally required on bare timber.

For a smoother finish, the final coat may be applied using fine grade 0000 wire wool in the direction of the grain. Wipe away any surplus with a clean cloth.

Application for Exterior Wood

For exterior timber, apply a liberal first coat and allow it to dry without wiping off the surplus. Oak and softwoods may require additional coats to help seal the timber effectively. End grain may require up to six coats.

Do not apply Mylands Danish Oil to exterior timber if it is raining or rain is expected.

Coverage & Drying Time

  • Coverage: Approximately 10–12 square metres per litre, depending on the absorbency of the timber and method of application.
  • Recoat time: 4–6 hours at 20°C. Drying will take longer in cold or damp conditions.
  • Temperature: Do not apply if the temperature is below 5°C.
  • Between coats: Rub down lightly with fine wire wool.

Cleaning & Maintenance

Clean oiled surfaces using a damp cloth. For more heavily soiled surfaces, a small amount of liquid detergent can be added to the water.

Old or worn oiled surfaces can be refurbished by abrading the surface and applying further coats of Mylands Danish Oil.

Exterior timber should be re-oiled at least annually. Horizontal surfaces may require more frequent re-coating.

Mylands Danish Oil – Product Information

  • Size: 1 Litre
  • Type: Danish Oil wood finish
  • Composition: Tung Oil, synthetic resins, driers and solvents
  • Finish: Hard, water-resistant satin
  • Suitable for: Most types of timber
  • Use: Interior and exterior wood
  • Application: Brush or cloth
  • Cleaning: White spirit. Clean brushes immediately after use.

Important Safety Information

Always refer to the manufacturer’s Safety Data Sheet before use. Cloths and rags containing Danish Oil should never be left rolled up or screwed together, as they can spontaneously combust. Spread them out to dry or place them in a container of water.

Tung Oil is a component of Danish Oil and is extracted from nuts, so the product may cause an allergic reaction.

Frequently Asked Questions

Can Mylands Danish Oil be used outdoors?

Yes. Mylands Danish Oil is suitable for both interior and exterior wood, including garden furniture. Exterior timber should be maintained with further coats at least annually.

Can I use Danish Oil on worktops?

Yes. Mylands Danish Oil is suitable for timber worktops and gives a hard, water-resistant satin finish.

How many coats of Danish Oil should I apply?

For interior bare timber, a minimum of three coats is normally required. Exterior timber may need additional coats, particularly oak, softwoods and end grain.

How long does Mylands Danish Oil take to dry?

The stated recoat time is approximately 4–6 hours at 20°C. It can take longer in cold or damp conditions.

How much Danish Oil will I need?

Coverage is approximately 10–12 square metres per litre, depending on the absorbency of the timber and how the oil is applied.

How do I clean brushes after using Danish Oil?

Clean brushes immediately after use with white spirit, before the oil has dried.

How do I maintain wood treated with Danish Oil?

Clean the surface with a damp cloth. When the finish becomes worn, abrade the surface and apply further coats. Exterior timber should be re-oiled at least once a year, with horizontal surfaces potentially needing more frequent treatment.

Safety Data Sheets

PDFSafety Data

Questions & answers

Ask Bio — questions answered by our team are published here.

No published questions yet. Ask Bio — once our team answers, it appears here.

Similar Options

Other choices in this category

Complete Your Basket

Goes well with this product

Customers also bought

Based on real order data