Floe Truma Ultraflow Drainage Kit

The Floe system offers a simple and cost-saving solution to drain your water system, ensuring protection against winter frosts and reducing the risk of infection caused by stagnant water throughout the year. With step-by-step instructions, you’ll be guided through a quick and easy process, allowing you to enjoy your leisure vehicle all year round. Just a few minutes spent draining your water system will give you peace of mind, no matter the season.

Key Features:

• Protect against winter frosts and stagnant water risks.
• Quick and easy process with step-by-step guidance.
• Enables year-round use of your leisure vehicle.
• Includes an instructional DVD demonstrating the drain-down process.

Drainage Instructions

Follow these steps to efficiently drain your water system:

1. Step 1:

   • Drain the water heater and open the tap to run the water pump briefly.
   • Turn off the power to the electric pump.
   • Close all taps.
   • Fit the Floe device to the plug-in adaptor.

2. Step 2:

   • Attach the device and adaptor to the socket on the side of your van.

3. Step 3:

   • Connect an air compressor or foot pump to the valve at the bottom of the Floe device.
   • Compress to 15PSI (1BAR) maximum.

4. Step 4:

   • Go to the first tap and run until it is dry.
   • Once dry, close taps at sinks, showers, and all other water outlets.
   • Leave all taps in the open position once the system is drained.

Note: This is guidance only. Always refer to the manufacturer’s instructions for complete details.