Fiddes Teak Oil – 1 Litre

Fiddes Teak Oil – 1 Litre

In stock
£17.89

Ask Bio about this product

AI assistant · instant answers

Fiddes Teak Oil is based on special vegetable oils and solvents to give a clear penetrating seal and finish to nourish interior and exterior woods. It is ideal for use on Teak and Cedar. Based on special vegetable oils and solvents Give a clear penetrating seal and finish For interior and exterior w

1
Subscribe & save 10%

Get a reminder for regular delivery and save with code SUBSCRIBE10 at checkout. Pause or cancel anytime.

Sold and dispatched by Priory Polishes View store →

Allergen information: Full label details for this product are still being verified. If you have a food allergy or intolerance, please check the pack label on delivery or contact us before ordering, and we will confirm with the supplier.

Description

Fiddes Teak Oil is based on special vegetable oils and solvents to give a clear penetrating seal and finish to nourish interior and exterior woods. It is ideal for use on Teak and Cedar.

How to use Fiddes Teak Oil

  1. Ensure all areas to be coated are extremely well ventilated during and after application.
  2. Always test on a small area prior to initial application. No primer required.
  3. Apply at room temperature. Do not thin.
  4. Stir oil thoroughly before and during use, and apply in a warm, well ventilated room.
  5. Apply Fiddes Teak oil thinly using a good quality bristle or synthetic brush and lay evenly, following the direction of the grain.
  6. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application.
  7. Leave to dry 10-12 hours in warm, dry well ventilated conditions, or preferably overnight.
  8. Apply 3 coats to new interior timber, and 4 coats to exterior timber but always allow to dry fully between coats.
  9. Clean tools with White Spirit.
  10. To renovate previous application of Teak Oil, lightly sand area with 150 grit sandpaper, and re-apply.

Please note –

Maintenance – For regular light maintenance, clean with a damp cloth and wipe dry. Re-application may be necessary where soiling or staining is apparent, following the application details above.

Coverage – A single application will cover approximately 20-24 square meters per litre, depending on the density of the substrate.

Safety Data Sheets

PDFSafety Data

Questions & answers

Ask Bio — questions answered by our team are published here.

No published questions yet. Ask Bio — once our team answers, it appears here.

Similar Options

Other choices in this category

Complete Your Basket

Goes well with this product

Customers also bought

Based on real order data