Osmo Wood Glue Adhesive

Osmo Wood Glue Adhesive

In stock
£8.79

Ask Bio about this product

AI assistant · instant answers

Osmo Wood Glue Adhesive creates a strong bond in just 5 minutes. Osmo D3 Express Wood PVA Adhesive is a ready to use, water-resistant wood adhesive suitable for interior and selected exterior use. It has excellent bond strength on all types of wood including flat laminates, synthetic resin board and

1
Subscribe & save 10%

Get a reminder for regular delivery and save with code SUBSCRIBE10 at checkout. Pause or cancel anytime.

Sold and dispatched by Priory Polishes View store →

Allergen information: Full label details for this product are still being verified. If you have a food allergy or intolerance, please check the pack label on delivery or contact us before ordering, and we will confirm with the supplier.

Description

Osmo Wood Glue Adhesive creates a strong bond in just 5 minutes. Osmo D3 Express Wood PVA Adhesive is a ready to use, water-resistant wood adhesive suitable for interior and selected exterior use. It has excellent bond strength on all types of wood including flat laminates, synthetic resin board and chipboard. It is also suitable for use on paper, cardboard, textile-backed PVC cloth onto wood.

How to use Osmo Wood Glue Adhesive

  1. For best results, ensure the wood is clean, dry and free from dust, dirt, grease or any other surface contaminants prior to application.
  2. Make sure the glue is thoroughly shaken/mixed before use.
  3. Apply the wood glue evenly to one of the surfaces.
  4. Clamp both surfaces together.
  5. Using a damp, lint-free cloth, carefully remove any excess glue from furniture or wood immediately after clamping.
  6. Allow to dry for at least 20 minutes before handling.
  7. Full water resistance is achieved after 7 days.

Please note –

This product must be stored air-tight between 5 – 25°C for a maximum of 12 months from production date.

Do not allow Osmo D3 Express Wood PVA Adhesive to freeze.

Always do a test area before starting any project to assess product suitability and performance. Follow the manufacturers instructions on the container at all times.

Customer Examples:

Osmo D3 Wood Adhesive Glue
Table with Osmo D3 Glue
Osmo D3 Wood Adhesive Glue
Osmo D3 Wood Adhesive on a chair
Osmo D3 Wood Adhesive Glue
Osmo Glue used on floor
Osmo D3 Wood Adhesive Glue
Osmo D3 Adhesive on a bench

How to use wood Glue

Here is an example of a Georgian chest of drawers that had opened up on the joints along the side and top of the carcass.

Georgian chest in need of wood glue

The first thing we did was clean the joints, making sure any old glue and dust is removed.

Apply the wood glue

next we applied the wood glue along all the joints, ensuring all edges are covered with plenty of glue.

clamp the topclamp the side

Once the glue is applied, we use sash clamps to pull the joints back together with firm, tight pressure. This is important as you need pressure for the glue to set correctly. You should always use some old timber blocks to stop the clamps marking the wood.

wipe off excess

Once it is fully clamped, wipe off any excess glue that has squeezed out from the pressure of the clamps. You can use a slightly damp cloth. Leave to dry for 24 hours before removing the clamps for the glue to fully cure.

finished sidefinished wood glue

The next day, we removed the clamps from the chest and as you can see the joins are fully closed back, with no gaps visible in the join.

Safety Data Sheets

PDFProduct InformationPDFSafety Data

Questions & answers

Ask Bio — questions answered by our team are published here.

No published questions yet. Ask Bio — once our team answers, it appears here.

Similar Options

Other choices in this category

Complete Your Basket

Goes well with this product

Customers also bought

Based on real order data